Focusrite ISA One microphone preamplifier

ISA ONE

Featuring a rugged, portable all-metal enclosure, ISA One combines the classic Focusrite microphone preamp with a flexible, independent DI channel and optional 192kHz precision A-D conversion. At the heart of the ISA range is the microphone preamplifier with its Lundahl input transformer – essentially the same circuit, based on the original ISA 110, that has been used for 30 years in successive Focusrite designs. The input transformer imparts a special character to the sound that can't be truly emulated in any other way, while the modern twist of variable input impedance allows for a new degree of flexibility.

Whether you're an artist, engineer or producer, you'll appreciate the versatility of the ISA One, with its front-panel DI input. The DI includes low/high impedance switching and an amplifier output, and its own feed to the optional A-D converter and separate rear-panel XLR output.

• Classic ISA mic preamp design featuring Lundahl LL1538 input transformer
  
• Flexible independent DI channel
  
• Switchable input impedance including classic ISA 110 setting
  
• Headphone output with volume control
  
• Dedicated insert point
  
• Optional stereo 192kHz A-D conversion card
  

• Gain Range (Mic): 0dB to 60dB in 10dB steps 20 dB of variable gain
  
• EIN (Mic): -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz band-pass filter
  
• Noise (Mic): Noise at output with unity gain (0 dB) and 22 Hz-22 kHz band pass filter-97 dBu
  
• Signal-To-Noise Ratio (Mic): 106 dB relative to max headroom (9dBu)
  
• Frequency Response (Mic): At minimum gain (0 dB)-0.5dB down at 10Hz and -3dB down at 125kHz
  
• CMRR (Mic): 98dB (Channel 1, 1kHz, maximum gain with 24 dBu input)
  
• Crosstalk Channel To Channel (Mic): With 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA
  

• Gain Range (Line): -20dB to 10dB in 10dB steps 20 dB of variable gain
  
• Input Impedance (Line): 10 kO from 10 Hz to 200 kHz
  
• Total Harmonic Distortion Noise (Line): Measured with a 0 dBu input signal, and a 22 Hz-22 kHz band pass filter0.0001
  
• Frequency Response (Line): At unity gain (0 dB)-0.3dB down at 10Hz and -3dB down at 200kHz
  

• Gain Range (Instrument): 10dB to 40dB continuously variable
  
• Input Impedance (Instrument): High = greater than 1M Low =greater than 300k
  
• THD (Instrument): At minimum gain ( 10)
  

• Roll-Off: 18 dB per octave (3 pole filter)
  
• Frequency: Fixed 75Hz measured at the 3dB down point
  
• Dimensions: 220mm x 104mm x 254 - 290mm
  
• Weight 3.9 kg
  

• Focusrite ISA One Analogue microphone preamplifier x1
  
• Power cord x1