Glensound AoIP-44 Audio Over IP interface

‌Audio Network 4 Input, 4 Output Analogue Break Out Box

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface.

The AoIP can be used as a simple low cost audio I/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a building's network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio.

Features

• Simple economical Audio Over IP (AoIP) interface featuring Dante / AES67
  
• 4 balanced audio inputs to the network
  
• 4 balanced audio outputs from the network
  
• 19" 1RU subrack
  
• Subrack can be mounted with audio/ mains/ network connectors at the front or rear of the subrack
  
• High quality audio circuits (designed for Broadcast)
  
• Internal switch mode mains power supply
  
• Can be powered by PoE
  
• Back up DC power supply option
  
• Single Cat5 copper Ethernet interface on Neutrik Ethercon
  
• Part of our Signature Range

Specifications:

Audio

• Input Type:  Electronically balanced (can be wired unbalanced) Neutrik 3 pin XLR Socket
  
• Input Impedance:  >20k
  
• Output Impedance:  50 ohms
  
• Output Type:  Electronically balanced (can be wired un-balanced) Neutrik 3 pin XLR Plug
  
• Max Input before clip:  +18dBu
  
• Max output:  +18dbu
  
• Frequency Response: (+-0.25dB):  Flat until 22kHz
  
• Noise Residual:  -94.6dBu
  
• THD+N Relative (1k +8dBu):  0.00134%
  
• Dynamic Range:  112.6dBs
  
• Crosstalk (0dBu input to output 1kHz tone):  -94.7dBu

Network Audio

• Compatible Audio Network:  Dante uncompressed, low latency audio.  For full details visit www.audinate.com
  
• AES67 Compliant: The Audinate Ultimo chipset that we use in this product is AES67 compliant
  
• Network Connection:  Neutrik RJ45 EtherCON
  
• Dante Network resolution:  24bit
  

Dante Network sample rate:  

• 4 Bi-directional channels @ 44.1/ 48kHz
  
• 2 Bi-directional channels @ 88.2/96kHz

Power

• DC Power:  +12v 240mA, -12v N/A
  
• Mains Input:  Filtered IEC 100 - 240VAC 47-63Hz
  
• PoE: Can be powered by PoE
  
• AC Consumption:  4.3 Watts
  
• Internal Mains Fuse:  20mm 1A Anti Surge

Physical

• Size:  445 x 123 x 44mm (LxDxH) no rack ears, 482mm length (19" 1RU) with rack ears
  
• Weight:  1.2Kg
  
• Shipping Weight:  2.7Kg

Environmental

• Operating Temperature: 0 to +50°C (32 to 122°F)
  
• Storage Temperature: -20 to +70°C (-4 to 158°F)
  
• Relative Humidity:  0 to 95% non-condensing
  

Package includes:

• Glensound AOIP44 Audio Over IP interface x1