Audio-Technica AT-VM95E/H

‌Audio-Technica AT-VM95E/H stereo cartridge

AT-VM95E/H

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell

• AT-VM95E mounted on AT-HS6BK headshell
  
• The total set weight is 15.5g
  
• Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Specsifications:

• Model: AT-VM95E/H
  
• Type: VM Stereo Dual Magnet
  
• Mounting: 1/2” centres
  
• Frequency Response: 20 - 22,000 Hz
  
• Channel Separation: 20 dB (1 kHz)
  
• Output Channel Balance: 2.0 dB (1 kHz)
  
• Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
  
• Vertical Tracking Angle: 23°
  
• Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
  
• Stylus Shape: Elliptical
  
• Stylus Size: 0.3 x 0.7 mil
  
• Stylus Construction: Bonded Round Shank
  
• Cantilever: Aluminium Pipe
  
• Coil Impedance: 3.3 kΩ (1 kHz)
  
• Coil Inductance: 550 mH (1 kHz)
  
• DC Resistance: 485 Ω
  
• Static Compliance: 17 x 10 – 6 cm / dyne
  
• Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  
• Wire Used for Coil: T.P. Copper
  
• Recommended Load Impedance: 47,000 Ω
  
• Recommended Load Capacitance: 100-200 pF
  
• Weight: 15.5 g
  
• Dimensions: 21.2 × 21.4 × 62.4 ( H x W x D mm)
  
• Replacement Stylus: AT-VMN95E